Amiga Emulator Card Trial And Error

Select DH2: on the left (if DH2 does not appear in the list, you may have to type it in), and DH0: on the right.

It did not have a hard drive, but all Amiga 600 have an IDE port, and you can use a Compact Flash card with a CF-IDE adapter as a hard drive.

That worked fine, and I could install Workbench on the CF card, and use it.

But eventually I though I should try to use WHDLoad, so that I could run more games directly from the hard drive.

Amiga Emulator Card Trial And Error

I found a video by Nostalgia Nerd on Youtube, where he goes through the process of installing Classic Workbench and WHDLoad on a Compact Flash card, unfortunately this video is (currently) four years old, and also very quick With the help of the comments 1 and some trial and error, I managed to get it working, though.

This one actually had a hard drive, but who knows how long that will keep on working, so I though Id replace it with a Compact Flash card as well.

This time, however, for the benefits of my readers 2 I thought Id write down the process in a blog post.

I thought it might be useful because a) I prefer written instructions, and b) it would give me a chance to update and correct the instructions so that they actually work.

But you will need a Compact Flash card with a capacity of at least 4GB, some kind of CF-IDE adapter (not neccessarily that one) and of course a Compact Flash reader for your computer.

This tutorial also assumes that you are running Windows, although it should be possible to use pretty much the same procedure with FS-UAE on Linux or Mac.

This is not strictly necessary, but its faster than the standard AFFS and supports larger partitions.

These can be found for example at (paradise.untergrund.net), its the kickstarts.lha file youre looking for.

In order to do this, run diskpart in an Administrative command prompt.

This completely wipes the file system information from the disk, making it ready to use in the Amiga.

Now we need to configure the system, and make it a little faster than a real Amiga.

It should not be write protected (use a copy if you dont want to risk modifying your original image).

Click OK, and then Save changes to drive (if you get an error here, you may want to try another Card Reader).

Now you need to add the System.hdf file that you extracted from the Classic WB archive you downloaded in Step 1.

Click Add Hardfile and select the System.hdf file.

Make sure that the HD Controller is UAE, and name the device DH2.

Follow the instructions (there are many, many options, and I have no good advice to give about them), and when prompted to insert a Workbench disk, press F12 to enter settings and do that.

This is your change to choose between Workbench 3.0 and 3.1.

Rename the Classic WB partition to System2 (or something other than just System) and restart the virtual machine.

Amiga Mac Emulator Card